prikaz prve stranice dokumenta Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika
Access restricted to students and staff of home institution
undergraduate thesis
Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika
2018. urn:nbn:hr:190:191200
Bandov, Luka
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Cite this document

Bandov, L. (2018). Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:191200

Bandov, Luka. "Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:191200

Bandov, Luka. "Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:191200

Bandov, L. (2018). 'Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 27 April 2024, https://urn.nsk.hr/urn:nbn:hr:190:191200

Bandov L. Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 April 27] Available at: https://urn.nsk.hr/urn:nbn:hr:190:191200

L. Bandov, "Izrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:191200

Please login to the repository to save this object to your list.
Metadata
TitleIzrada računalnog i 3D ispis modela kučišta zupčastog prijenosnika
Title (english)Design and 3D print of a gearbox housing
AuthorLuka Bandov
MentorRobert Basan (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2018-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu dan je kratak uvod o zupčastim prijenosnicima, odnosno reduktorima, pri čemu se daje osvrt o kućištima reduktora na kojima je ovaj rad i baziran. Nakon uvoda slijedi analiza i ispravak grešaka na postojećim nacrtima kućišta dvostupanjskog reduktora prema pravilima za tehničko dokumentiranje i ispravno konstruiranje. Budući da su ispravljene sve vidljive greške uslijedila je izrada računalnog 3D modela kućišta, prilikom koje su pronađene dodatne greške koje nisu vidljive na nacrtima, te su također dokumentirane. Iz gotovog modela se izvuku ispravljeni nacrti, a model se dodatno pripremi za 3D ispis, s time da je prije pripreme modela nešto u kratko rečeno o tehnologiji 3D ispisivanja. Na kraju se pripremljeni model ispiše pomoću 3D pisača, a rezultat ispisa se dokumentira pripadajućim slikama.
Abstract (english)
This paper starts with a brief introduction to gearboxes, respectively reducers, in which the main overview is based on gearbox housings. After the introduction, the errors on the existing drawings of the two-stage gearbox housing were analysed and corrected following the rules for technical documentation and correct designing. Since all the visible errors were corrected, a digital 3D model of the housing was created, where additional errors, which were not visible on the drawings, were also documented. From the finished model, the corrected drawings are taken out, and the model is further prepared for 3D printing, but before the preparation of the model something short is said about 3D printing technology. Finally, the prepared model is printed using a 3D printer, and the print result is documented with the associated pictures.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:191200
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-10-26 07:47:04