prikaz prve stranice dokumenta Statička analiza navozne rampe za vozila
Access restricted to students and staff of home institution
undergraduate thesis
Statička analiza navozne rampe za vozila
2018. urn:nbn:hr:190:028226
Belobrajdić, Nikola
University of Rijeka
Faculty of Engineering
Department of Engineering Mechanics
Section of Structural Analysis

Cite this document

Belobrajdić, N. (2018). Statička analiza navozne rampe za vozila (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:028226

Belobrajdić, Nikola. "Statička analiza navozne rampe za vozila." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:028226

Belobrajdić, Nikola. "Statička analiza navozne rampe za vozila." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:028226

Belobrajdić, N. (2018). 'Statička analiza navozne rampe za vozila', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:028226

Belobrajdić N. Statička analiza navozne rampe za vozila [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:190:028226

N. Belobrajdić, "Statička analiza navozne rampe za vozila", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:028226

Please login to the repository to save this object to your list.
Metadata
TitleStatička analiza navozne rampe za vozila
Title (english)Static analysis of vehicle ramp
AuthorNikola Belobrajdić
MentorMarino Brčić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Engineering Mechanics)
(Section of Structural Analysis)
Rijeka
Defense date and country2018-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U zadatku je bilo potrebno provesti statiĉku analizu i dimenzioniranje navozne rampe za vozila. Konstrukcija navozne rampe izrađuje se od standardnih kutnih L-profila i plosnatog čelika. Najprije je bilo potrebno definirati profile, materijal, opterećenje i dimenzije same rampe. Nakon toga slijedi proraĉun unutrašnjih sila u nosačima i određivanje reakcija u osloncima. Iz dijagrama unutrašnjih sila određeni su kritični presjeci nosača gdje su se izračunavala normalna i posmična naprezanja po presjeku nosača. Nakon što se utvrdila kritična točka presjeka, korištenjem mjerodavnih teorija čvrstoće izvršena je provjera čvrstoće nosača. Na kraju je izvršena kontrola izvijanja stupova. Kako je vitkost nosača bila manja od granične korišten je izraz za kritično naprezanje prema Tetmajeru. Ustanovljeno je da nema opasnosti od izvijanja.
Abstract (english)
In this assignment it was required to conduct static analysis and dimensioning of a vehicle ramp. Vehicle ramp structure is made of standard equilateral angle section and rectangular plate steel. Firstly, steel profiles, material, load and vehicle ramp dimensions had to be defined. Calculation of internal forces as well as reaction forces at the supports comes next. Beam critical sections were determined from internal force diagrams where normal and shear stress on the cross section were calculated. After critical points on the cross section had been determined, proper yielding criterion were used to analyse the beams strength. Finally, analysis of columns buckling was conducted. Given that columns slenderness was less than critical, Tetmajer's formula was used to calculate critical stress. It was deduced that there is no risk of buckling.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:028226
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-11-22 07:40:37