prikaz prve stranice dokumenta Projekt paro-proizvodnog sustava za procesnu industriju
Access restricted to students and staff of home institution
master's thesis
Projekt paro-proizvodnog sustava za procesnu industriju
2019. urn:nbn:hr:190:003806
Pajković, Adi
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Process Energy Engineering and Environment Protection

Cite this document

Pajković, A. (2019). Projekt paro-proizvodnog sustava za procesnu industriju (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:003806

Pajković, Adi. "Projekt paro-proizvodnog sustava za procesnu industriju." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:003806

Pajković, Adi. "Projekt paro-proizvodnog sustava za procesnu industriju." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:003806

Pajković, A. (2019). 'Projekt paro-proizvodnog sustava za procesnu industriju', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 29 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:003806

Pajković A. Projekt paro-proizvodnog sustava za procesnu industriju [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 December 29] Available at: https://urn.nsk.hr/urn:nbn:hr:190:003806

A. Pajković, "Projekt paro-proizvodnog sustava za procesnu industriju", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:003806

Please login to the repository to save this object to your list.
Metadata
TitleProjekt paro-proizvodnog sustava za procesnu industriju
Title (english)Project of steam generation for proces industry
AuthorAdi Pajković
MentorVladimir Glažar (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Process Energy Engineering and Environment Protection)
Rijeka
Defense date and country2019-05-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu je izrađen toplisnki proračun, dimenzioniran je spremnik napojne vode s otplinjačem te je izvršen odabir opreme postrojenja sustava pripreme napojne vode i proizvodnje pare s pripadajučim detaljnim shemama. U prvom dijelu opisan je način rada postrojenja sa glavnim dijelovima. U drugom dijelu rada su napravljeni tehnički proračuni. Prikazane su karakteristične točke procesa, zatim su izračunate količine dimnih plinova, udijeli pojedinačnih plinova, dimenzioniran spremnik s otplinjačem i sveukupni toplinski gubitci. Zadnji dio rada sadrţi tehničke opise kotlovskog postrojenja, uljnog gospodarstva i obrade napojne vode. Temeljem tehničkog opisa, izrađenih shema i proračuna odabire se glavna oprema potrebna za proizvodnju projektom određene pare.
Abstract (english)
The focus of the study is on energy calculations, dimensioning of a feed water tank with a deaerator, equipment selection for water treatment and steam generation systems with detailed drawings of all systems. Firstly, the process of such plant was described including its main parts. Second part consists of technical calculations. Key points of the process were shown; quantity of the exhaust gases is determined as well as share of specific exhaust gases. Feed water tank and deaerator dimensions were calculated including all heat losses within the steam generator. Last part of this study includes technical descriptions of the steam generation, fuel oil and feed water treatment systems. Based on the technical data, drawings and calculations primary equipment for steam generation in the plant are selected.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:003806
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-06-03 08:11:32