prikaz prve stranice dokumenta Energetska analiza plinsko-parne kombinirane elektrane
Access restricted to students and staff of home institution
master's thesis
Energetska analiza plinsko-parne kombinirane elektrane
2020. urn:nbn:hr:190:025246
Lukić, Antun
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Process Energy Engineering and Environment Protection

Cite this document

Lukić, A. (2020). Energetska analiza plinsko-parne kombinirane elektrane (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:025246

Lukić, Antun. "Energetska analiza plinsko-parne kombinirane elektrane." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:025246

Lukić, Antun. "Energetska analiza plinsko-parne kombinirane elektrane." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:025246

Lukić, A. (2020). 'Energetska analiza plinsko-parne kombinirane elektrane', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:025246

Lukić A. Energetska analiza plinsko-parne kombinirane elektrane [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:190:025246

A. Lukić, "Energetska analiza plinsko-parne kombinirane elektrane", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:025246

Please login to the repository to save this object to your list.
Metadata
TitleEnergetska analiza plinsko-parne kombinirane elektrane
Title (english)Energy analysis of combined cycle power plant
AuthorAntun Lukić
MentorVladimir Glažar (mentor)
Committee memberVladimir Glažar (predsjednik povjerenstva)
Committee memberVedran Mrzljak (član povjerenstva)
Committee memberKristian Lenić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Process Energy Engineering and Environment Protection)
Rijeka
Defense date and country2020-12-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu provedena je energetska analiza kombiniranog plinsko-parnog dijela postrojenja. Analiza je napravljena za različite ulazne temperature u plinsku turbinu, a raspon temperatura kreće se od 1100 °C do 1700 °C. Osim različitog raspona temperatura, analiza je provedena i za različite tipove utilizatora (1-tlačni, 2-tlačni, 3-tlačni). U glavnom djelu rada provedena je analitička analiza za 1-tlačni utilizator i temperaturu od 1100 °C. Nakon provedene analize izrađena je računalna simulacija u programu „EBSILON Professional“. Dobiveni rezultati računalnim putem uspoređivan su sa rezultatima dobivenim analitičkim putem. Pomoću računalnog programa provedena je simulacija različitih tipova utilizatora (1-tlačni, 2-tlačni, 3-tlačni) za raspone temperatura od 1200 °C do 1700 °C. Dobiveni rezultati uspoređivani su i prikazani tabličnim i grafičkim putem.
Abstract (english)
In this master thesis, an energy analysis of the combined cycle power plant was calculated and presented. The analysis was done for different inlet temperatures in a gas turbine, where the taken temperature range was from 1100 °C to 1700 °C. In addition, the analysis was also performed for different types of heat recovery steam generators (1-pressure, 2-pressure, and 3- pressure). In the main part of this thesis, the analytical analysis was performed in a 1-pressure heat recovery device, and the used temperature was 1100 °C. After analytical analysis, a computer simulation was done in the program called „EPSILON Professional“ and given results were then compared with previously calculated analytical results. Using a computer program, a simulation was performed for different types of heat recovery steam generators (1-pressure, 2- pressure, 3-pressure) and temperatures from 1200 °C to 1700 °C. All results were presented in tabular and graphical ways.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:025246
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-08-26 08:42:29