prikaz prve stranice dokumenta Rekonstrukcija modela privodeće lopatice
Access restricted to students and staff of home institution
undergraduate thesis
Rekonstrukcija modela privodeće lopatice
2020. urn:nbn:hr:190:749042
Bulić, Martin
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Cite this document

Bulić, M. (2020). Rekonstrukcija modela privodeće lopatice (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:749042

Bulić, Martin. "Rekonstrukcija modela privodeće lopatice." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:749042

Bulić, Martin. "Rekonstrukcija modela privodeće lopatice." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:749042

Bulić, M. (2020). 'Rekonstrukcija modela privodeće lopatice', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 01 January 2025, https://urn.nsk.hr/urn:nbn:hr:190:749042

Bulić M. Rekonstrukcija modela privodeće lopatice [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2025 January 01] Available at: https://urn.nsk.hr/urn:nbn:hr:190:749042

M. Bulić, "Rekonstrukcija modela privodeće lopatice", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:749042

Please login to the repository to save this object to your list.
Metadata
TitleRekonstrukcija modela privodeće lopatice
Title (english)Three-dimensional imaging of a guide vane
AuthorMartin Bulić
MentorZoran Čarija (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberZoran Čarija (član povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2020-09-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U završnom radu je odrađena rekonstrukcija modela privodeće lopatice kroz proces reverzibilnog inženjerstva. Dobivene lopatice, dva različita modela, su najprije skenirane na zasebnim sustavima skeniranja, Shining Einscan-Pro i Atos Triple Scan. Nakon toga se pristupilo popunjavanju nedostataka Mesh modela istih pomoću software-a Atos Professional. Sljedeći korak je bio izrada CAD modela skeniranih lopatica. Za lopaticu skeniranu Shining Einscan-Pro sustavom imali smo nacrt te smo iz njega izvukli sam CAD model, dok za lopaticu skeniranu Atos Triple Scan sustavom nismo. Za nju smo morali izvlačiti dimenzije iz skeniranog modela korištenjem posebnih naredbi Atos Professional software-a. Nakon dobivenih dimenzija nacrtan je model iste što je omogućilo prijelaz na sljedeći korak. Usporedba dimenzija Mesh-a i CAD modela se također vršila u gore navedenom software-u. Usporedba je prikazana sa dijagramom boja, iz koje su vidljiva odstupanja ravnosti, cilindričnosti i odstupanja dimenzij
Abstract (english)
In this thesisi, the reconstruction of the model of the guide vane through the reverse engineering process is conducted. The given vanes, two different modes, were first scanned in separate scanning systems, Shining Einar-Pro and Atos Triple Scan. Subsequently, filling the holes in the Mesh model was done by means of the Athos Professionals software packgae. The next step was to create a CAD model of a scanned vane. For the guide vane, scanned by Shining EinscanPro system, we had a blueprint and we pulled the CAD model out of it while for the model scanned by the Atos Triple Scan System we did not. Hence, we had to extract the dimensions from the scanned model using specific commands of the Atos Professional Software. Once the dimensions were obtained, a model is drawn as it was needed for the transition to the next step. The comparison between the dimensions of the Mesh and the CAD model also occurred in the above software. The comparison is illustrated by the diagram showing the deviations of the level of uniformity, the cylindricity, and the deviation of the dimensional tolerances.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:749042
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-29 09:31:50