prikaz prve stranice dokumenta Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a
Access restricted to students and staff of home institution
master's thesis
Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a
2021. urn:nbn:hr:190:293307
Dumenčić, Karmen
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Production Equipment and Robotics

Cite this document

Dumenčić, K. (2021). Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:293307

Dumenčić, Karmen. "Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:293307

Dumenčić, Karmen. "Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:293307

Dumenčić, K. (2021). 'Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 06 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:293307

Dumenčić K. Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 July 06] Available at: https://urn.nsk.hr/urn:nbn:hr:190:293307

K. Dumenčić, "Izrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:293307

Please login to the repository to save this object to your list.
Metadata
TitleIzrada kalupne šupljine primjenom reverznog inženjerstva i CAM-a
Title (english)Mould Cavity Machining Using Reverse Engineering and CAM
AuthorKarmen Dumenčić
MentorZoran Jurković (mentor)
MentorMladen Perinić (komentor)
Committee memberNeven Lovrin (predsjednik povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
Committee memberDuško Pavletić (član povjerenstva)
Committee memberVladimir Glažar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Production Equipment and Robotics)
Rijeka
Defense date and country2021-05-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Prvi dio ovog rada je teoretski i objašnjava što je reverzno inženjerstvo, kao i postupak generiranja 3D modela, dok je u drugom dijelu teorija primijenjena na praktičnom primjeru. Reverznim inženjerstvom se od krajnjeg gotovog proizvoda postupcima unazad može dobiti isti taj proizvod. U ovom radu to je testirano i dokazano na primjeru masažera. Prvi korak bio je skenirati objekt 3D skenerom i popraviti mreţu dobivenu skeniranjem. Korišteni skener je ATOS Triple Scan, a podaci su obrađeni koristeći Geomagic Wrap. Potom je uslijedila izrada CAD modela da bi bilo moguće izraditi kalupnu šupljinu. Obrada kalupne šupljine vršila se uz pomoć softvera Mastercam. Budući da je riječ o kalupnoj šupljini koja je na svim dijelovima istog oblika i na svakom od ukupno 4 dijela se nalaze 2 dţepa, postupak obrade koji je korišten je glodanje.
Abstract (english)
The first part of this thesis is theoretical and explains what reverse engineering is, as well as the process of generating a 3D model, while in the second part the theory is applied to a practical example. By reverse engineering, the same product can be obtained backwards from the final finished product. In this thesis, this has been tested and proven on the example of a massager. The first step was to scan the object with a 3D scanner and repair the mesh obtained by scanning. The scanner used is an ATOS Triple Scan, and the data was processed using a Geomagic Wrap. This was followed by the production of a CAD model to make it possible to make a mould cavity. Moulding cavity processing was performed with the help of Mastercam software. Each part of this mould cavity has the same shape and all 4 of those parts have a shape made out of 2 pockets, so the machining process used was milling.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:293307
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-07 08:44:39