prikaz prve stranice dokumenta Trostupanjski horizontalni reduktor s uparenim zupčanicima
Access restricted to students and staff of home institution
undergraduate thesis
Trostupanjski horizontalni reduktor s uparenim zupčanicima
2021. urn:nbn:hr:190:948637
Srdić, Saša
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Cite this document

Srdić, S. (2021). Trostupanjski horizontalni reduktor s uparenim zupčanicima (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:948637

Srdić, Saša. "Trostupanjski horizontalni reduktor s uparenim zupčanicima." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:948637

Srdić, Saša. "Trostupanjski horizontalni reduktor s uparenim zupčanicima." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:948637

Srdić, S. (2021). 'Trostupanjski horizontalni reduktor s uparenim zupčanicima', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 30 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:948637

Srdić S. Trostupanjski horizontalni reduktor s uparenim zupčanicima [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 November 30] Available at: https://urn.nsk.hr/urn:nbn:hr:190:948637

S. Srdić, "Trostupanjski horizontalni reduktor s uparenim zupčanicima", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:948637

Please login to the repository to save this object to your list.
Metadata
TitleTrostupanjski horizontalni reduktor s uparenim zupčanicima
Title (english)Three-stage horizontal reduction gear with paired gears
AuthorSaša Srdić
MentorŽeljko Vrcan (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2021-01-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog završnog rada bilo je projektiranje trostupanjskog horizontalnog reduktora s uparenim kosim ozubljenjem za primjenu u industriji. Nakon proračuna osnovnih parametara uslijedio je proračun svakog stupnja zasebno. Proračun za sva tri stupnja prijenosa provjeren je u programu Gearpac-u cx 3,5 gdje je došlo do manjih promjena dimenzija zupčanika. Nakon izračuna svakog stupnja izabrano je ulje, a nakon izračuna zadnjeg stupnja odabralo se ulje koje zadovoljava viskoznost za sva tri stupnja. Budući da je kućište dosta velikih dimenzija, proračunom je dokazano da je moguće hlađenje kućišta konvekcijom i odabran je industrijski ventilator koji pomaže hlađenju ulja. Zatim je slijedio proračun minimalnog promjera vratila i duljine pera te su svi uvjeti zadovoljeni. Ležajevi su odabrani sa SKF-ove stranice i svi zadovoljavaju traženu trajnost od min 12000 h. Nakon što su svi proračuni bili završeni slijedila je izrada sklopnog nacrta i radioničkih nacrta za sva tri vratila sa zupčanicima, donjeg kućišta te gonjenih zupčanika.
Abstract (english)
The aim of this final paper was to design a three-stage horizontal reduction gear with paired bevel gears for industrial applications. The calculation of the basic parameters was followed by the calculation of each stage separately. The calculation for all three gears was checked in the Gearpac cx 3.5 program where there were minor changes in gear dimensions. An oil was selected after the calculation of each stage and after the calculation of the last stage, an oil satisfying the viscosity for all three stages was selected. Since the gear case is quite large, the calculation proved that it is possible to cool the case by convection and an industrial fan was selected to help cool the oil. Calculation of the minimum shaft diameter and key length proceeded and all conditions met. The bearings were selected from SKF's website and all met the required durability of at least 12000 working hours. At last, the assembly drawings and manufacturing drawings were made for all three shafts with the gears, lower case and the driven gears.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:948637
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-11 06:19:16