prikaz prve stranice dokumenta Trostupanjski reduktor s paralelnim izlaznim vratilima
Access restricted to students and staff of home institution
undergraduate thesis
Trostupanjski reduktor s paralelnim izlaznim vratilima
2021. urn:nbn:hr:190:801961
Sabo, Sven
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Cite this document

Sabo, S. (2021). Trostupanjski reduktor s paralelnim izlaznim vratilima (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:801961

Sabo, Sven. "Trostupanjski reduktor s paralelnim izlaznim vratilima." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:801961

Sabo, Sven. "Trostupanjski reduktor s paralelnim izlaznim vratilima." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:801961

Sabo, S. (2021). 'Trostupanjski reduktor s paralelnim izlaznim vratilima', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:801961

Sabo S. Trostupanjski reduktor s paralelnim izlaznim vratilima [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:190:801961

S. Sabo, "Trostupanjski reduktor s paralelnim izlaznim vratilima", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:801961

Please login to the repository to save this object to your list.
Metadata
TitleTrostupanjski reduktor s paralelnim izlaznim vratilima
Title (english)Three stage reduction gear with parallel exit shafts
AuthorSven Sabo
MentorŽeljko Vrcan (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberJerko Škifić (član povjerenstva)
Committee memberIgor Bonefačić (član povjerenstva)
Committee memberSanjin Kršćanski (član povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2021-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Zadatak je konstruiranje trostupanjskog reduktora sa kosim zubima. Materijal za izradu vratila i zupčanika je C4130. materijal za izradu kućišta reduktora je SL300. Svaki stupanj je izračunat zasebno, te provjeren da ne smeta jedan u odnosu na drugi. Problem je bio između drugog i trećeg stupnja, te je isti riješen većim razmakom osi. Pogonski zupčanici su napravljeni u sklopu sa vratilom, a gonjeni su napravljeni odvojeno. Napravljena je kontrola vratila, nakon čega su izabrani odgovarajući ležajevi. Spoj gonjenih zupčanika sa vratilom je preko pera. Glavna obrada vratila i zupčanika je kovanje u ukovnju zbog velikih promjera. Nakon toga ide tokarenje i glodanje prema potrebi, te izrada prijelaznih utora. Za podmazivanje zupčanika i ležajeva je napravljen toplinski proračun, te je odabran sistem podmazivanja sa uranjanjem zupčanika u ulje.
Abstract (english)
The task is to construct a three-stage reducer with oblique teeth. The material for making the shaft and gear is C4130. The material for making the gearbox housing is SL300. Each degree was calculated separately, and checked not to interfere with each other. The problem was between the second and third degree, and the same was solved by a larger axis spacing. The drive gears are made in conjunction with the shaft, and the drive gears are made separately. The shaft control was made, after which the appropriate bearings were selected. The connection of the driven gears with the shaft is through the key. The main machining of shafts and gears is forging in forging due to large diameters. This is followed by turning and milling as needed, and making transition slots. A thermal calculation was made for the lubrication of gears and bearings, and a lubrication system with immersion of the gears in oil was selected.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:801961
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-15 12:27:37