prikaz prve stranice dokumenta Projekt tehnološkog procesa za tijelo nosača
Access restricted to students and staff of home institution
master's thesis
Projekt tehnološkog procesa za tijelo nosača
2019. urn:nbn:hr:190:223606
Sušec, Dario
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Cite this document

Sušec, D. (2019). Projekt tehnološkog procesa za tijelo nosača (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:223606

Sušec, Dario. "Projekt tehnološkog procesa za tijelo nosača." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:223606

Sušec, Dario. "Projekt tehnološkog procesa za tijelo nosača." Master's thesis, University of Rijeka, Faculty of Engineering, 2019. https://urn.nsk.hr/urn:nbn:hr:190:223606

Sušec, D. (2019). 'Projekt tehnološkog procesa za tijelo nosača', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 05 September 2024, https://urn.nsk.hr/urn:nbn:hr:190:223606

Sušec D. Projekt tehnološkog procesa za tijelo nosača [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2019 [cited 2024 September 05] Available at: https://urn.nsk.hr/urn:nbn:hr:190:223606

D. Sušec, "Projekt tehnološkog procesa za tijelo nosača", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:190:223606

Please login to the repository to save this object to your list.
Metadata
TitleProjekt tehnološkog procesa za tijelo nosača
Title (english)Process planning for body carrier
AuthorDario Sušec
MentorMladen Perinić (mentor)
MentorZoran Jurković (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRoberto Žigulić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2019-05-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog diplomskog rada bila je izrada projekta tehnološkog procesa tijela nosača rasprskača u količini od 8000 komada. Na samom početku rada potrebno je bilo napraviti tehnološku analizu izradka, gdje su se definirali oblik, materijal, dozvoljena odstupanja te kvaliteta obrade. Zatim je bilo potrebno napraviti analizu procjene vrijednosti izrade, kako bi se odlučilo da li se za ulazni materijal odabire šipka ili otkivak. Nakon što je proračunom dobiveno da je jeftinija izrada ako se za ulazni materijal odabire otkivak, sljedeći je korak bio izraditi strukturu odvijanja procesa, sa razradom svih operacija i zahvata, kod čega je bilo potrebno izabrati korištenu proizvodnu opremu, strojeve, alata te naprave. Nakon razrade napravila se tehnološka dokumentacija zadanog procesa izrade. Sljedeće je bilo potrebno izraditi 3D model izradka u programskom paketu SolidWorks, dok je na samom kraju rada bilo potrebno izraditi simulaciju procesa izrade u programskom paketu SolidCAM.
Abstract (english)
The subject of this graduate thesis was compose a project of the technological process of injector carrier body in quantity of 8000 pieces. At the beginning it was necessary to make a tehnological analysis of workpiece, where we define form, material, permissible deviations and quality of processing. Then we need to make an analysis of the estimation of the production value, how we can decide whether the input material is selected by rod or forged steel. After calculating that it is cheaper to produce if input material will be forged steel, we need to select the production equipment, the machines where the individual operations would be performed, then the technological process had to be elaborated. The elaboration defines the time of making some operations, that is, the time of making every single operation. All the tools that will be used to perform are also defined. After processing, it was necessary to create a technological documentation. After that, we need to make a 3D model of workpiece, and at the end, it was necessary to create a simulation of the processing using software package SolidCAM.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:223606
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-03 07:41:42