prikaz prve stranice dokumenta Razvoj mehatroničkog postava za mjerenje trenja
Access restricted to students and staff of home institution
master's thesis
Razvoj mehatroničkog postava za mjerenje trenja
2020. urn:nbn:hr:190:823311
Makovac, Igor
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Cite this document

Makovac, I. (2020). Razvoj mehatroničkog postava za mjerenje trenja (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:823311

Makovac, Igor. "Razvoj mehatroničkog postava za mjerenje trenja." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:823311

Makovac, Igor. "Razvoj mehatroničkog postava za mjerenje trenja." Master's thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:823311

Makovac, I. (2020). 'Razvoj mehatroničkog postava za mjerenje trenja', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:823311

Makovac I. Razvoj mehatroničkog postava za mjerenje trenja [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:190:823311

I. Makovac, "Razvoj mehatroničkog postava za mjerenje trenja", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:823311

Please login to the repository to save this object to your list.
Metadata
TitleRazvoj mehatroničkog postava za mjerenje trenja
Title (english)Development of mechatronics set-up for friction measurement
AuthorIgor Makovac
MentorErvin Kamenar (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberLado Kranjčević (član povjerenstva)
Committee memberErvin Kamenar (član povjerenstva)
Committee memberSandro Doboviček (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2020-04-08, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj diplomskog rada bio je prenamijeniti postojeći sustav preciznog pozicioniranja u linearni sustav za mjerenje trenja, odnosno osmisliti i konstruirati rješenja za prihvat vrška za mjerenje trenja kao i način određivanja i mjerenja normalne sile i sile trenja. Za regulaciju pomaka sustava koristio se PID regulator a kao ulazni referentni signal korišten je trokutasti profil, pritom za povratnu vezu koristeći linearni inkrementalni enkoder. Takav sustav se upravlja pomoću National Instruments hardvera i LabVIEW softvera. Ovakav projekt je iziskivao istraživanje stanja tehnike i komercijalnih rješenja, a potom optimizaciju idejnog koncepta uzimajući u obzir postojeću formu sustava i njegovo nadograđivanje potrebnim elementima. Nadalje, svi novi dijelovi su prvo konstruirani u CAD sučelju, a potom izrađeni metodom 3D tiskanja iz visokorazlučivih STL datoteka. Finaliziranjem projekta dobiven je funkcionalan prototip sustava za mjerenje trenja s linearnim pomakom, a time je omogućena eksperimentalna faza u kojoj su se mogli istraživati koeficijenti trenja različitih materijala pri različitim karakteristikama profila gibanja.
Abstract (english)
The goal of this thesis was to modify an already existing system for ultra-high precision positioning into a linear friction measuring system, i.e., to design and implement the solutions for supporting the contact tip for measuring friction as well as for detecting and measuring normal and friction forces. A PID controller was used to obtain closed-loop control with a triangle signal used as the reference input, while a linear incremental encoder is employed as a feedback sensor. The system is controlled via National Instruments hardware and LabVIEW software. Detailed research on state-of-the-art and commercially available solutions is followed by the optimization of the concept of the prototype of the tribometer. The components of the device were designed in CAD software and 3D printed from high-resolution STL files. Finalizing the project, a prototype of the system for measuring friction with linear movement was achieved, thus enabling the experimental phase in which measuring the friction coefficient of various materials under different movement characteristics was possible.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:823311
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-04-07 13:30:29