prikaz prve stranice dokumenta Razvoj naplatka od ugljičnih vlakana za bolid Formule student
Access restricted to students and staff of home institution
undergraduate thesis
Razvoj naplatka od ugljičnih vlakana za bolid Formule student
2020. urn:nbn:hr:190:437993
Guštin, Alen
University of Rijeka
Faculty of Engineering
Department of Engineering Mechanics
Section of Machine Dynamics

Cite this document

Guštin, A. (2020). Razvoj naplatka od ugljičnih vlakana za bolid Formule student (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:437993

Guštin, Alen. "Razvoj naplatka od ugljičnih vlakana za bolid Formule student." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:437993

Guštin, Alen. "Razvoj naplatka od ugljičnih vlakana za bolid Formule student." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:437993

Guštin, A. (2020). 'Razvoj naplatka od ugljičnih vlakana za bolid Formule student', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:437993

Guštin A. Razvoj naplatka od ugljičnih vlakana za bolid Formule student [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:190:437993

A. Guštin, "Razvoj naplatka od ugljičnih vlakana za bolid Formule student", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:437993

Please login to the repository to save this object to your list.
Metadata
TitleRazvoj naplatka od ugljičnih vlakana za bolid Formule student
Title (english)Development of carbon fiber rim for Formula student car
AuthorAlen Guštin
MentorSanjin Braut (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberSanjin Braut (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Engineering Mechanics)
(Section of Machine Dynamics)
Rijeka
Defense date and country2020-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu prikazana je provedba postupka konstruiranja naplatka od ugljičnih vlakana za bolid Formule Student. Opterećenja na naplatak izračunata su na temelju podataka o bolidu Riteh Racing Teama RRC6. Dobivena su tri kritična stanja opterećenja: maksimalno opterećenje u zavoju, opterećenje pri maksimalnom kočenju i opterećenje pri udaru u izbočinu. Izračunata opterećenja korištena su u izračunu faktora sigurnosti komercijalno dostupnog aluminijskog naplatka metodom konačnih elemenata. Prikazane su specifičnosti svojstava i izrade dijelova od plastike ojačane ugljičnim vlaknima. Na temelju toga izrađen je model naplatka od ugljičnih vlakana. Model je dimenzioniran i optimiziran korištenjem metode konačnih elemenata. Za finalni model izračunat je utjecaj deformacije naplatka na postavke ovjesa vozila.
Abstract (english)
In this paper the process of designing a carbon fiber wheel rim for a Formula Student vehicle is shown. Loads were calculated based on the data received from Riteh Racing Team`s RRC6 race car. Three critical load cases were identified: maximum load while cornering, maximum braking load and load from a bump. Calculated load cases were used to calculate the factor of safety and stiffness of a commercially available aluminum rim using the finite element method. The unique characteristics of performance and manufacturing of carbon fiber reinforced plastics were presented. Based on them, a model of a carbon fiber wheel rim was made. The model was dimensioned and optimized using the finite element method. The influence of the final rim design on suspension settings of the vehicle was calculated.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:437993
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-30 09:31:33