prikaz prve stranice dokumenta Izrada 3D modela primjenom povratnog inženjerstva
  Download
PDF 2.61 MB
undergraduate thesis
Izrada 3D modela primjenom povratnog inženjerstva
2023. urn:nbn:hr:190:821162
Veršić, Marin
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design

Cite this document

Veršić, M. (2023). Izrada 3D modela primjenom povratnog inženjerstva (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:821162

Veršić, Marin. "Izrada 3D modela primjenom povratnog inženjerstva." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:821162

Veršić, Marin. "Izrada 3D modela primjenom povratnog inženjerstva." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:821162

Veršić, M. (2023). 'Izrada 3D modela primjenom povratnog inženjerstva', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 17 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:821162

Veršić M. Izrada 3D modela primjenom povratnog inženjerstva [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 December 17] Available at: https://urn.nsk.hr/urn:nbn:hr:190:821162

M. Veršić, "Izrada 3D modela primjenom povratnog inženjerstva", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:821162

Please login to the repository to save this object to your list.
Metadata
TitleIzrada 3D modela primjenom povratnog inženjerstva
Title (english)Creation of 3D model using reverse engineering method
AuthorMarin Veršić
MentorKristina Marković (mentor)
MentorŽeljko Vrcan (mentor)
Committee memberSamir Žic (predsjednik povjerenstva)
Committee memberKristina Marković (član povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
Rijeka
Defense date and country2023-07-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Cilj ovog rada bio je upoznati se s izradom 3D modela primjenom metode povratnog inženjerstva te s tehnologijama koje ova metoda koristi. S obzirom da je primjena povratnog inženjerstva danas veoma široka, bitno je napomenuti da se ovaj rad fokusira na primjenu povratnog inženjerstva u domeni strojarstva. Tehnologije koje su spomenute i korištene u sklopu ovog rade jesu tehnologije za 3D skeniranje i 3D printanje. Prvi dio rada je teorijski i pokriva definiranje pojmova, povijesni pregled i metodologiju spomenutih pojmova. Drugi dio rada je praktični dio u kojem se metodom povratnog inženjerstva izrađuje model oštećenog poklopca za ventilaciju automobila. Kroz praktični dio korišteni su ATOS Q 3D skener za skeniranje predmeta, zajedno sa softverom GOM Inspect u kojemu su naknadno obrađeni rezultati skeniranja, a za printanje 3D modela korišten je printer Prusa i3 MK3S i softver Prusa Slicer.
Abstract (english)
The aim of this thesis was to familiarize oneself with the creation of 3D models using the method of reverse engineering and the technologies employed by this method. Considering the wide range of applications of reverse engineering today, it is important to note that this paper focuses on its application in the field of mechanical engineering. The technologies mentioned and utilized within this paper are 3D scanning and 3D printing technologies. The first part of the thesis is theoretical and covers the definition of terms, a historical overview, and the methodology of the mentioned concepts. The second part is the practical section where a model of a damaged car ventilation cover is created using the method of reverse engineering. In the practical part, an ATOS Q 3D scanner was employed for object scanning, along with GOM Inspect software used for subsequent processing of the scanning results. The Prusa i3 MK3S printer and Prusa Slicer software were utilized for 3D model printing.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:821162
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-07-10 10:33:32